Truma Combi Heater 6 - iNet X Panel

The Combi 6 combines two functions in one device: heating and water heating. The particularly lightweight and compact Combi heater ensures comfortable temperatures in larger caravans and motorhomes. The heater contains a ten-liter stainless steel water tank. This is heated in the winter. In summer, you can also just heat the water without heating. The water is heated to 60 degrees in about 20 minutes - perfect for a shower after a sweaty mountain bike tour.

The Combi 6 can be flexibly installed in your vehicle. The warm air flows almost silently into the vehicle via four air outlets and distributes evenly - for a perfect indoor climate. Since the Combi heater is installed, for example, under the seat bench, the freedom of passage in the interior is maintained.

The proven Combi heater is also available with integrated electric heating rods (Combi 4 E, Combi 6 E) and as a diesel heater (Combi D 6 and Combi D 6 E).

This makes the Combi 6 special:

• The heater Combi 6 works even with empty water tank
• Drain valve FrostControl installed
• Simple operation via digital control panel CP plus iNet ready
• Air conditioning possible in conjunction with a Truma air conditioning

Attention: For the installation of the heater must necessarily be one of the two water sets dazubestellt! (Fir tree connection Art. 721912 or John Guest Art. 721913)

Technical data:

• Fuel: Gas
• Nominal heat output: 2000W / 4000W / 6000W
• Efficiency: 98%
• Gas/diesel consumption: 160/335/460 g/h
• Burner power levels: 3
• Air flow rate: max. 287 m3/h
• Water capacity: 10 l
• Water heating time (from approx. 15° to approx. 60°C): Water tank approx. 23 min
• Pump pressure: max. 2.8 bar
• System pressure: max. 4.5 bar
• Weight (without peripherals): 14.4 kg
• Weight (with peripherals): 14.9 kg
• Installation dimensions LxWxH: 540 x 500 x 350 mm